- No communication with the anti -lock brake control module
|
- Fuse.
- Circuit.
- ABS control module.
|
|
- Unable to enter self-test - communication OK
|
|
|
- The red brake warning indicator does not self-check
|
- Low brake fluid warning switch.
- Circuit.
- Hybrid electronic cluster (HEC).
- Ignition switch.
- Parking brake.
|
- REFER to INSTRUMENT CLUSTER
.
|
- The red brake warning indicator stays on when the ignition switch is in RUN
|
- Low brake fluid warning switch.
- Circuit.
- Hybrid electronic cluster (HEC).
- Ignition switch.
- Parking brake.
|
- REFER to INSTRUMENT CLUSTER
.
|
- The yellow ABS warning indicator does not self-check - Always on NO DTCs
|
- Circuit.
- ABS control module.
- Hybrid electronic cluster (HEC).
|
|
- Spongy brake pedal with no warning indicator
|
- Air in hydraulic brake system.
- Base brake system.
|
|
- Poor vehicle tracking during anti-lock function
|
- Air in hydraulic brake system.
- Hydraulic control unit.
- Base brake system.
|
|
- The traction control is inoperative
|
- Circuit.
- ABS control module.
- Hydraulic control unit.
|
|
- The traction control switch indicator is inoperative
|
- Circuit.
- Traction control switch.
- ABS control module.
|
|
- The traction control cannot be disabled
|
- Circuit.
- Traction control switch.
- ABS control module.
|
|
- The traction control indicator stays on continuously with no DTCs retrieved
|
- Circuit.
- Hybrid electronic cluster (HEC).
- ABS control module.
|
- REFER to INSTRUMENT CLUSTER
.
|