Exhaust System Alignment
WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle on a hoist.
- Loosen all exhaust component fasteners from the exhaust manifold(s) to the muffler inlet pipe.
- Beginning at the front of the vehicle, align the exhaust system to establish maximum clearance.
- Beginning at the front of the vehicle, tighten all fasteners to specification. For additional information, refer to SPECIFICATIONS .
- Start the engine and check the exhaust system for leaks.