Temperature Control Cable: Installation
WARNING: This page is about a different car, the 2002 Saturn LW300, 2002 Saturn LW200, 2002 Saturn L300, 2002 Saturn L200, and 2002 Saturn L100. However, it is still accessible from the selected car via links, so may be relevant.
- Route NEW cable through control head opening in the Instrument Panel (I/P). Cable housing flag goes to the control head end. Guide cable around outside of I/P support brace.
- Install cable eyelet onto temperature door lever pin.
- Install HVAC control head. See HVAC CONTROL HEAD .
NOTE:
Do not install cable housing into cable housing retaining clip at this time. Cable will be secured in cable housing retaining clip in adjustment procedure.