Autolamps Time Delay Adjustment
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The time delay can be programmed through the message center using the message center buttons (if equipped) or using the following steps.
- Start with the ignition switch off and the headlamp switch in the AUTOLAMPS ON position.
- Place the headlamp switch in the OFF position.
- Place the ignition switch in the RUN position.
- Place the ignition switch in the OFF position.
- Place the headlamp switch in the AUTOLAMPS ON position. The exterior lamps turn on at this point.
- Wait the desired amount of time and place the headlamp switch in the OFF position (maximum of 3 minutes). The exterior lamps turn off and the autolamp time delay is now set.