Remote Transmitter Programming
NOTE:
All remote transmitters are programmable and must be set at the same time.
- Make sure that the anti-theft system is not armed or triggered.
- Turn the ignition switch from OFF to RUN four times within three seconds, ending in RUN. The locks will then lock and then unlock, confirming program mode has been entered.
- Press any button on a keyless entry remote transmitter, and the door will lock and then unlock to confirm that each remote transmitter has been programmed.
- If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
- To exit program mode, wait 7.5 seconds.