Torque Specifications
WARNING: This page is about a different car, the 2004 Mercury Grand Marquis and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| 43-pin bulkhead connector bolts | 5 | - | 44 | ||
| A/C line-to-front cover nut | 10 | - | 89 | ||
| Accelerator cable bracket bolt | 6 | - | 53 | ||
| Accelerator control splash shield bolts | 10 | - | 89 | ||
| Air cleaner resonator nut | 6 | - | 53 | ||
| Body ground strap-to-engine bolt | 6 | - | 53 | ||
| Camshaft bearing cap bolts(1) | - | - | - | ||
| Camshaft sprocket bolt | 120 | 89 | - | ||
| Canister purge valve-to-evaporator housing nut | 6 | - | 53 | ||
| Connecting rod bearing caps(1) | - | - | - | ||
| Crankshaft main bearing caps(1) | - | - | - | ||
| Crankshaft pulley bolt(1) | - | - | - | ||
| Crash bracket nut and bolt (rear of the LH cylinder head) | 25 | 18 | - | ||
| Cylinder head(1) | - | - | - | ||
| EGR tube | 40 | 30 | - | ||
| Engine front cover(1) | - | - | - | ||
| Exhaust manifold | 34 | 25 | - | ||
| Exhaust manifold-to-converter nuts | 34 | 25 | - | ||
| Flywheel bolts | 80 | 59 | - | ||
| Fuel injection supply manifold crash bracket bolts | 25 | 18 | - | ||
| Fuel injection supply manifold studs | 10 | - | 89 | ||
| Generator battery lead nut | 10 | - | 89 | ||
| Generator-to-intake bracket bolts | 10 | - | 89 | ||
| Ground strap (located on the rear of the RH cylinder head) nut | 10 | - | 89 | ||
| Ground wire-to-fender bolt | 10 | - | 89 | ||
| Ground wire-to-transmission case nut | 10 | - | 89 | ||
| Idler pulley bolt | 25 | 18 | - | ||
| Ignition coil bolts | 6 | - | 53 | ||
| Intake manifold bolts(1) | - | - | - | ||
| LH cylinder head wiring bracket nut and bolt | 25 | 18 | - | ||
| Motor mount-to-crossmember nuts | 60 | 44 | - | ||
| Oil filter adapter bolts | 25 | 18 | - | ||
| Oil level indicator tube bolt | 10 | - | 89 | ||
| Oil pan bolts(1) | - | - | - | ||
| Oil pan drain plug | 14 | 10 | - | ||
| Oil pump bolts | 10 | - | 89 | ||
| Oil pump screen cover and tube-to-oil pump screen cover and tube spacer bolt | 25 | 18 | - | ||
| Oil pump screen cover and tube bolts | 10 | - | 89 | ||
| Oil pump screen cover and tube spacer | 25 | 18 | - | ||
| Power steering high pressure line nut | 25 | 18 | - | ||
| Power steering pump bolts | 25 | 18 | - | ||
| Radiator bracket bolts | 10 | - | 89 | ||
| Rear main seal retainer plate | 10 | - | 89 | ||
| Starter motor bolts | 24 | 18 | - | ||
| Throttle body bolts | 10 | - | 89 | ||
| Timing chain guide bolts | 10 | - | 89 | ||
| Timing chain tensioner bolts | 25 | 18 | - | ||
| Torque converter inspection cover bolts | 19 | 14 | - | ||
| Torque converter nuts | 36 | 27 | - | ||
| Transmission mount nuts | 103 | 76 | - | ||
| Transmission-to-cylinder block bracket bolt | 25 | 18 | - | ||
| Transmission wiring harness bracket (located at the rear of RH cylinder head) bolt and stud | 25 | 18 | - | ||
| Valve cover | 10 | - | 89 | ||
| Water bypass tube stud | 25 | 18 | - | ||
| Water outlet adapter | 25 | 18 | - | ||
| Water pump bolts | 25 | 18 | - | ||
| Water pump pulley bolts | 25 | 18 | - | ||
|