LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2004 >> Monterey >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Removal And Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation

  1. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  2. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Output Shaft Speed (OSS) Sensor Removal Sequence
    G03244567Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals