LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2006 >> Mountaineer 4.0 E, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Removal And Installation >> Accelerator Pedal - Fixed >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the accelerator pedal electrical connector.
  2. Remove the nuts and the accelerator pedal assembly.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals