LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2007 >> Milan Base, 3.0 1, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Electronic Engine Controls) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2007 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: PCM replacement DOES NOT require new keys or programming of keys.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  3. Disconnect the 2 PCM electrical connectors.
  4. Remove the 4 bolts and the PCM.
scientia non olet · About LEMON Manuals