LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2008 >> Sable Premier, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Powertrain Control Module (PCM): Installation

  1. Install the PCM and the 2 nuts.
    • Tighten to 5 Nm (44 lb-in).
  2. Connect the 3 PCM electrical connectors.
  3. Install the cowl panel grille. For additional information, refer to FRONT END BODY PANELS article.
  4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
  5. Reprogram the passive anti-theft system (PATS). Carry out the Parameter Reset procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) article.
scientia non olet · About LEMON Manuals