Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Remove the 3 pin-type retainers and the upper trunk trim.

Fig 1: Pin-Type Retainers

Courtesy of FORD MOTOR CO.

Disconnect liftgate/trunk module (LTM) electrical connectors.

Fig 2: LTM Electrical Connectors

Courtesy of FORD MOTOR CO.

Remove the rear seat backrest. For additional information, refer to SEATING article.
Disconnect the wheel speed sensor electrical connectors.

Fig 3: Wheel Speed Sensor Electrical Connectors

Courtesy of FORD MOTOR CO.

Reposition the sound insulator.

Fig 4: Sound Insulator

Courtesy of FORD MOTOR CO.

NOTE: LTM retainer screws do not need to be removed.

Loosen the LTM retainer screws.

Fig 5: LTM Retainer Screws

Courtesy of FORD MOTOR CO.

Remove the LTM.
To install, reverse removal procedure.