LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 533 (Automatic Transaxle - 6 Speed) >> In-Vehicle Repair >> Transaxle Support Insulator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transaxle Support Insulator: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the rear transaxle mount bolts using a wire brush and apply new threadlock and sealer to the threads.
  2. Position the transaxle mount in place and install the bolts.
    • Tighten to 55 N.m (41 lb-ft).
    Fig 1: Locating Transaxle Mount
    G04657352Courtesy of FORD MOTOR CO.
  3. Install the rear transaxle mount.
    • Tighten to 90 N.m (66 lb-ft).
Fig 2: Locating Rear Transaxle Mount
G04657353Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals