LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System >> Removal And Installation >> Front Controls Interface Module (FCIM) - MKZ >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Remove the LH and RH floor console finish moldings. For additional information, refer to CONSOLE - FLOOR, MKZ .
  2. Remove the instrument panel finish molding. For additional information, refer to INSTRUMENT PANEL - EXPLODED VIEW .
  3. Remove the 4 screws and the Front Controls Interface Module (FCIM).
    • Disconnect the electrical connectors.
      Fig 1: Identifying FCIM Electrical Connectors
      G06263197Courtesy of FORD MOTOR CO.
  4. Remove the 8 screws and separate the Audio Control Module (ACM) from the FCIM  .
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals