OBD-II & Emissions - Overview (W10, W11)
- Detection of air leaks in intake manifold (after throttle)
- Air intake temperature sensor
- Camshaft sensor
- Crankshaft sensor
- CAN Bus error management
- ECU Self test
- Catalyst monitoring
- Lambda control activation monitoring
- Coolant temperature sensor
- Thermostat monitor
- 5 Volts supplies
- Downstream O2 sensor heater
- Upstream O2 sensor heater
- Upstream O2 sensor monitor
- Clutch solenoid
- Electrical motor - CVT
- Gear box interface
- Secondary pressure solenoid
- Ratio control
- Rough road detection
- Evaporative system leak detection
- Misfire monitor
- Fuel system monitor
- Idle speed control
- Ignition coil
- Injection valve
- Knock sensor
- Intake manifold pressure sensor
- Motorized throttle controller Driver
- Motorized throttle controller
- Throttle position sensor
- Pedal position sensor
- Knock SPI BUS
- Switch inputs
- Vehicle speed
- Ambient Temperature Sensor And Intake Air Temperature Plausibility Monitoring
- Positive Crankcase Ventilation (PCV)
- Listing of all electronic Powertrain Input and Output signals
- OBD-II Connector
- location of MIL