61 35... Replacing seat module (up to 09/2009)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
From version 09/2009 a seat module in which plugs 4 and 5 have been altered will be fitted.
Necessary preliminary tasks:
- Remove SEAT MODULE
NOTE:
Positions of plugs and associated pin assignments are set out in the diagnosis system.
The repair instruction represents the highest vehicle configuration. Pin assignments of plug connections may be absent if optional equipment is not fitted.
Special tools for disconnecting:
Secondary lock: Special tool 61 0 313
Primary lock: Special tool 61 0 326
SPECIAL TOOLS DESCRIPTION CHART
| Separate housing. Provide leads with new stop parts and connect in new housing (BMW Parts Department 6 901 842) as follows: | ||||
|---|---|---|---|---|
| Plug 4 (Heating, cushion) |
Pin assignment, previous | Pin assignment, new | Part number, stop part | Color, lead |
| 1 | 1 | 6 931 524.9 | brown/yellow | |
| 2 | 3 | 6 931 510.9 | blue/green | |
| 3 | 4 | 6 931 522.9 | black/yellow | |
SPECIAL TOOLS DESCRIPTION CHART
| Disconnect leads from housing and connect in new housing (BMW Parts Department 6 901 832) as follows: | ||
|---|---|---|
| Plug connector 5 (Heating, backrest) | Pin assignment, previous | Pin assignment, new |
| 1 | 1 | |
| 2 | 2 | |
| 3 | 3 | |