LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2986 (Trailers - Repair - E90) >> 8621 Hood >> 8621... Installing sponge rubber seal >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

8621... Installing sponge rubber seal: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2010 BMW 335xi, 2010 BMW 335i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing old sponge rubber seal: Pull off old sponge rubber seal. Remove remaining traces of adhesive with universal cleaner, refer to BMW Operating Fluids.

Sponge rubber seal runs along area marked gray (1).

Fig 1: Identifying Sponge Rubber Seal Gray Marked Area
G04766475Courtesy of BMW OF NORTH AMERICA, INC.

Lay sponge rubber seal (1) in middle of hood contact surface (2).

scientia non olet · About LEMON Manuals