LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3199 (Trailers - Repair - E91) >> 8621 Hood >> 86 21... Replacing inside light
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

86 21... Replacing inside light

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) at side recess (arrowed) and remove towards bottom.

Fig 1: Locating Cover Side Recess
G04766504Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lamp housing (1) at side recess (arrowed).

Fig 2: Locating Lamp Housing Recess
G04766505Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect flat connector (1) from flat connector contact.

Fig 3: Identifying Flat Connector
G04766506Courtesy of BMW OF NORTH AMERICA, INC.
CAUTION: Before drilling out rivets, drive in rivet pins with a punch.

Drill out rivets (1). Pull off inside light mounting bracket (2) over flat connector (3).

Fig 4: Identifying Mounting Bracket And Flat Connector With Rivets
G04766507Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals