64 12 ... Initializing independent heating remote control
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
The following steps are required for initializing a new independent heating remote control or after replacing the Car Access System control unit:
- Close and then reopen central locking with vehicle remote control.
- Within 5 seconds: Switch ignition lock from terminal "0" to terminal "R" and then back to terminal "0".
- Press and hold down "OFF" button on independent heating remote control.
- Press "ON" button on independent heating remote control 3 times in succession
The vehicle's central locking closes and opens automatically on successful initialization.
NOTE:
Both independent heating remote controls must be reinitialized after the Car Access System control unit has been replaced.