LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mini >> 2024 >> Cooper JCW, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Technical Data -- (F57) >> 32 Steering And Wheel Alignment Technical Data >> 3200 Wheel Alignment Technical Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

3200 Wheel Alignment Technical Data

32 00 WHEEL ALIGNMENT F57 LIFE CYCLE IMPULSE FROM 03/2021 KOREAN NATIONAL-MARKET VERSION - TECHNICAL DATA SPECIFICATION (WITH/WITHOUT JCW WHEEL ARCH TRIM)

OBSERVE TEST CONDITIONS .    
Front axle:    
Total toe-in   0° 12' ±12'
Adjustment(1) total toe-in   0° 12' ±4'
Track difference(2) single wheel between left/right   max. 12'
Camber (difference between left/right at maximum 30')   - 28' ± 30'
Adjustment(1) camber   - 28' ± 25'
Toe difference angle   (difference between left/right max.30')
Caster   (difference between left/right max.30')
Front wheel offset   0° 15'
Maximum steering angle    
- Inner wheel Approx. ° 37° 00'
  • Outer cornering wheel
 Approx. ° 31° 06'
Rear axle:    
Total toe-in   0° 14' ± 12'
Adjustment(1) total toe-in   0° 14' ± 4'
Camber:   -1° 55' ± 25'
Camber (difference between left/right max. 30')    
Adjustment(1) camber   -1° 55' ± 5'
Geometrical driving axis   0° ± 12'
NOTE:
(1) In order to minimize setting faults (measuring accuracies), a lower tolerance must be used for the toe/camber adjustment!
NOTE:
(2) Toe difference angle of front axle = Criterion for steering wheel inclination
32 00 WHEEL ALIGNMENT F57 LIFE CYCLE IMPULSE FROM 03/2021 SPORTS SUSPENSION SETTINGS WITHOUT LOWERING - TECHNICAL DATA SPECIFICATION (WITH/WITHOUT WHEEL ARCH TRIM)

OBSERVE TEST CONDITIONS .    
Front axle:    
Total toe-in   0° 12' ±12'
Adjustment(1) total toe-in   0° 12' ±4'
Track difference(2) single wheel between left/right   max. 12'
Camber (difference between left/right at maximum 30')   - 30' ± 30'
Adjustment(1) camber   - 30' ± 25'
Toe difference angle   (difference between left/right max. 30')
Caster   (difference between left/right max. 30')
Front wheel offset   0° 15'
Maximum steering angle    
  • Inner wheel
 Approx. ° 37° 00'
  • Outer cornering wheel
 Approx. ° 31° 06'
Rear axle:    
Total toe-in   0° 14' ± 12'
Adjustment(1) total toe-in   0° 14' ± 4'
Camber:   -1° 55' ± 25'
Camber (difference between left/right max. 30')    
Adjustment(1) camber   -1° 55' ± 5'
Geometrical driving axis   0° ± 12'
NOTE:
(1) In order to minimize setting faults (measuring accuracies), a lower tolerance must be used for the toe/camber adjustment!
NOTE:
(2) Toe difference angle of front axle = Criterion for steering wheel inclination
32 00 WHEEL ALIGNMENT F57 LIFE CYCLE IMPULSE FROM 03/2021 STANDARD SUSPENSION - TECHNICAL DATA SPECIFICATION (WITH/WITHOUT JCW WHEEL ARCH TRIM)

OBSERVE TEST CONDITIONS .    
Front axle:    
Total toe-in   0° 12' ±12'
Adjustment(1) total toe-in   0° 12' ±4'
Track difference(2) single wheel between left/right   max. 12'
Camber (difference between left/right at maximum 30')   - 30' ± 30'
Adjustment(1) camber   - 30' ± 25'
Toe difference angle   (difference between left/right max. 30')
Caster   (difference between left/right max. 30')
Front wheel offset   0° 15'
Maximum steering angle    
- Inner wheel Approx. ° 37° 00'
- Outer cornering wheel Approx. ° 31° 06'
Rear axle:    
Total toe-in   0° 14' ± 12'
Adjustment(1) total toe-in   0° 14' ± 4'
Camber:   -1° 55' ± 25'
Camber (difference between left/right max. 30')    
Adjustment(1) camber   -1° 55' ± 5'
Geometrical driving axis   0° ± 12'
NOTE:
(1) In order to minimize setting faults (measuring accuracies), a lower tolerance must be used for the toe/camber adjustment!
NOTE:
(2) Toe difference angle of front axle = Criterion for steering wheel inclination
3200 TECHNICAL DATA OVERVIEW

Tolerance for ride height at design level 
  Tolerance for setpoint value  max. 2 mm
Difference between left and right  max. 2 mm
32 00 CHASSIS/WHEEL ALIGNMENT - NORMAL POSITION F57 - TECHNICAL DATA SPECIFICATION

Vehicle loaded in normal position Vehicle with complete equipment for normal operation with:
2 x 68 kg on front seats (seats in central position), 1 x 14 kg in trunk (center) and full fuel tank.
scientia non olet · About LEMON Manuals