LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1987 >> Precis Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Manual Transaxle On-Vehicle Service - Lancer Evolution) >> Diagnosis < S-AWC(Super All Wheel Control) > >> Symptom Procedures >> INSPECTION PROCEDURE 2: Mode does not change even when the AWC switch is pressed < Vehicles with steering wheel audio remote control switch > >> AWC Mode Select Switch System Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

AWC Mode Select Switch System Circuit

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC C1613: AWC MODE SELECT SWITCH SYSTEM (CLOGGING) < VEHICLES WITH STEERING AUDIO REMOTE CONTROL SWITCH >  .

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect trouble symptom may occur. Prior to this diagnosis, always diagnose the CAN bus lines.
  • Whenever the ECU is replaced, ensure that the CAN bus lines are normal.