<< A >> Select Cable Connection (Transaxle Side) / Clip Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Set the select cable clips to a status shown in the figure, then disconnect the cable.

Fig 1: Removing Select Cable Clips
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Push down the clip claw using a screwdriver or others. Then, remove the clip together with the cable from the bracket.

Fig 2: Identifying Clip Together With Cable From Bracket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.