Service Specifications
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS CHART
| Item | Standard value | Limit | |
|---|---|---|---|
| Steering wheel free play mm (inch) | With engine running | - | 30 (1.2) |
| With engine stopped | 16.5 (0.6) or less | - | |
| Steering angle | Inside wheel | 33°10' ± 1°30' | - |
| Outside wheel (reference value) | 28°10' | - | |
| Toe-in mm (in) | 0 ± 2 (0 ± 0.07) | - | |
| Tie rod end ball joint breakaway torque N.m (in-lb) | 2.9 (26) or less | - | |
| Engine idle speed r/min | 700 ± 50 | - | |
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 32 (7.2) or less [5.9 (1.33) or less] | - | |
| Oil pump pressure MPa (psi | Oil pump relief pressure | 8.1 - 8.8 (1,174 - 1,276) | - |
| Pressure under no-load conditions | 1.0 (144) | - | |
| Steering gear retention hydraulic pressure | 8.1 - 8.8 (1,174 - 1,276) | - | |
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.6 - 2.0 (5.2 - 17.6) [0.4 (3.5) or less] | - | |
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | |