Generator Assembly: Inspection: Pulley

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Set the special tool MB992226 to the pulley.
Fix the special tool MB9922226, with the glasses wrench to prevent the rotor shaft from rotating.
Lock the pulley when rotating it clockwise. Check that the pulley rotates smoothly when rotating it counterclockwise.
CAUTION: Locking the one-way clutch might cause the damaged drive belt and an abnormal noise.

Fig 1: Identifying Special Tool MB992226 To Pulley
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.