LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1987 >> Starion ESI-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> D << 1ST-2ND Speed Synchronizer Sleeve Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> D << 1ST-2ND Speed Synchronizer Sleeve Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 1st-2nd speed synchronizer sleeve in the illustrated direction.
    2. Fig 1: Identifying 1st-2nd Speed Synchronizer Sleeve Installation Position
    G05394005Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the synchronizer outer ring, synchronizer cone and synchronizer inner ring.
  3. After installation, check that the 1st-2nd speed gears rotate smoothly.
scientia non olet · About LEMON Manuals