Tightening Torque: Notes
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Each torque value in the table is a standard value for tightening under the following conditions.
- Bolts, nuts and washers are all made of steel and plated with zinc.
- The threads and bearing surface of bolts and nuts are all in dry condition.
The values in the table are not applicable:
- If toothed washers are inserted.
- If plastic parts are fastened.
- If bolts are tightened to plastic or die-cast inserted nuts.
- If self-tapping screws or self-locking nuts are used.