LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Standard >> Repair and Diagnosis >> Engine Performance >> System >> ECI CEC System >> Testing & Diagnosis >> Component Testing & Inspection >> ISC Servo Motor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ISC Servo Motor

  1. Turn ignition switch to "OFF" position. Disconnect ISC servo connector. Check motor coil continuity between terminals No. 1 and 4. See Figure . Resistance should read 5-11 ohms. If resistance is 0 ohms or abnormally large, open or short circuit exists in motor coil. Replace ISC servo assembly.
  2. Connect four 1.5-volt (6 volts total) DC dry cells between terminals No. 1 and 4. Check that servo motor operates. If not, replace ISC servo assembly.
  3. Make sure there is no continuity between terminals No. 1 or 4 and injection mixer body. If continuity exists, there is a short circuit in coil. Replace ISC servo assembly.
scientia non olet · About LEMON Manuals