LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1988 >> Starion ESI-R, Standard >> Repair and Diagnosis >> Engine Performance >> System >> ECI CEC System >> Testing & Diagnosis >> ECI Inspection Test >> All Others (Output Signal Chart Step 1)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Others (Output Signal Chart Step 1)

  1. Turn ignition switch to "LOCK" position. Remove large and small harness connector from ECU. On ECI Checker (MD998406), set check switch to "OFF" position and select switch to "A" position.
  2. Connect White connectors (labeled "CHECKER") of Harness Connector (MD998437) to ECI checker. Connect harness connector to ECU and body side harness connectors. See Figure and Figure . Perform checks according to appropriate ECI SYSTEM OUTPUT SIGNAL CHART-STEP 1.
scientia non olet · About LEMON Manuals