Throttle Opener (On-Vehicle)
- Start engine and bring operating temperature to 185-205°F (85-95°C). Remove air cleaner. Disconnect Yellow-striped vacuum hose from throttle opener.
- Connect a hand vacuum pump to disconnected nipple. Apply 19.4 in. Hg vacuum. Vacuum should hold. Throttle opener rod should be pulled upward.
- Start engine. Let idle. With air conditioner switch in the "OFF" position, place finger over disconnected (Yellow-striped) vacuum hose. No vacuum should be felt.
- Turn air conditioner switch to the "ON" position. Vacuum should be felt. Raise engine RPM to 1200. Vacuum should not be felt.