Low-Reverse Band Adjustment: Pickup
- Raise vehicle, drain transmission and remove oil pan.
- Loosen adjusting screw lock nut and back off five turns. Ensure adjusting screw turns freely in lever.
- Using torque wrench, tighten band adjusting screw to 30 INCH lbs. (3.5 N.m).
- Back off adjusting screw 6 turns. Hold adjusting screw in this position and tighten lock nut to 25 ft. lbs. (34 N.m).
- Reinstall oil pan using new gasket. Tighten pan bolts to 150 INCH lbs. (17 N.m). Refill with specified transmission fluid.