Dynamic Damper

Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1 . Distance must be within specification. See the DYNAMIC DAMPER INSTALLATION SPECIFICATIONS table.

DYNAMIC DAMPER INSTALLATION SPECIFICATIONS

Application

⁽¹⁾ Damper-To-Boot End Distance In. (mm)

Mirage

1.5L

17.1-17.3 (434-439)

1.6L

5.5-5.7 (140-145)

⁽¹⁾	Ensure axle shaft is in straight position.

Fig 1: Installing Dynamic Damper

Courtesy of CHRYSLER MOTORS.