Wheel Speed Sensor Insulation Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Connect the circuit tester to the wheel speed sensor using the special tool extra fine probe (MB992006), and measure the insulation resistance between terminal No. 1/2 and the wheel speed sensor body as a single unit.
Standard value: 5 MΩ or more

Fig 1: Measuring Insulation Resistance Between Terminal No. 1/2 And Wheel Speed Sensor Body
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If the insulation resistance is not within the standard value range, replace the wheel speed sensor with a new one.