Except 4WS-Rear
- Disconnect coil high tension wire. Crank engine 10-15 seconds while turning steering wheel left and right. Connect coil high tension wire. Start engine, and let it idle. Turn steering wheel left and right until no air bubbles appear in oil reservoir.
- Check fluid level, and ensure fluid is not milky. Turn steering wheel left and right and ensure fluid level does not change. If fluid level changes more than 1/4" (6 mm) or if pump is noisy, fill with fluid to MAX mark on dipstick again. Repeat procedure until air bubbles are no longer present in fluid and fluid level stabilizes.
CAUTION:
DO NOT
hold steering wheel to left or right lock for longer than 10 seconds or oil pump damage may occur.