October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Transistor (Eclipse)
- Disconnect power transistor connector. Using an analog ohmmeter, connect positive ohmmeter lead to terminal No. 7 and negative lead to terminal No. 3. See Fig 1
. Ensure there is no continuity.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
- Using a 1.5-volt dry cell battery, connect positive end of 1.5-volt battery to power transistor terminal No. 6 and negative end to terminal No. 3. Ohmmeter should now read continuity between power transistor terminals No. 7 and No. 3.
- Connect positive end of 1.5-volt battery to power transistor terminal No. 2 and negative end to terminal No. 3. Connect positive ohmmeter lead to terminal No. 1 and negative lead to terminal No. 3. Ohmmeter should read continuity. Replace power transistor if it does not test as described.