Coolant Temperature Sensor
- Remove coolant temperature sensor from intake manifold and place end of sensor in water. Do not allow sensor to touch container. Terminal connector portion of sensor should be .12" (3.0 mm) above water.
- Gradually heat water and read resistance values at terminal connectors. See COOLANT TEMPERATURE SENSOR RESISTANCE table. If resistance is not within specification, replace sensor.
COOLANT TEMPERATURE SENSOR RESISTANCE
| Temperature °F (°C) | Ohms |
|---|---|
| 32 (0) | 5900 |
| 68 (20) | 2500 |
| 104 (40) | 1100 |
| 176 (80) | 300 |