LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1992 >> Diamante Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> Self-Diagnostic System >> Retrieving Codes >> Traction Control System Using Scan Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Traction Control System Using Scan Tester

  1. With ignition off, connect Multi-Use Tester (MB991341C) with ROM pack to both self-diagnostic connectors, located under right side of driver's dash.
  2. Turn ignition on. Read and record all diagnostic output (trouble) codes from module memory. Refer to Multi-Use Tester (MUT) instructions for specific trouble code retrieval procedure.
  3. After all trouble codes have been retrieved and recorded, clear codes from ECU memory. Refer to tester instructions for specific trouble code clearing instructions. See TROUBLE CODE DEFINITION chart.
  4. If trouble codes cannot be cleared, module is currently detecting a malfunction. If codes can be cleared, problem is either intermittent or only appears while driving.
scientia non olet · About LEMON Manuals