LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1992 >> Eclipse Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Speed Sensitive Wiper System Test >> Intermittent Switch Input Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intermittent Switch Input Circuit

  1. Disconnect ETACS control unit. With intermittent (wiper) switch in FAST position, check resistance between control unit harness connector terminal No. 1 and ground. See Figure -Figure . Resistance should be zero (0) ohms.
  2. Rotate intermittent switch to SLOW position while measuring resistance at terminal No. 1. Resistance should gradually increase to 1000 ohms as switch position changes. If resistance is not as indicated, check circuit and/or intermittent switch. To check intermittent switch, See appropriate STEERING COLUMN SWITCHES article in the ACCESSORIES/SAFETY EQUIPMENT Section.
scientia non olet · About LEMON Manuals