LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1992 >> Montero Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Component Testing >> Wheel Speed Sensor >> Sensor Resistance Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Resistance Test

  1. Before testing sensor resistance, ensure pole piece-to-wheel speed sensor tip is clean. Check wheel sensor pole piece for damage. If damaged, replace sensor.
  2. Disconnect sensor connector. Inspect sensor wiring harness for broken and pinched wires. Repair or replace as necessary. Using an ohmmeter, measure sensor resistance at wiring connector. Front sensor resistance should be 900-1100 ohms. Rear resistance should be 1300-2100 ohms. If resistance is not within specification, replace sensor. If resistance is within specification, go to GROUND CIRCUIT TEST.
scientia non olet · About LEMON Manuals