LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1992 >> Precis Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Speed Sensitive Wiper System Test >> Ignition Switch Input Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Input Circuit

  1. Disconnect ETACS control unit. With ignition switch in ACC (accessory) position, check for battery voltage at control unit harness connector terminal No. 7. See Figure -Figure .
  2. With ignition switch in OFF position, no voltage should be present at terminal No. 7. If voltage is not as indicated, check circuit and/or ignition switch. To check ignition switch, See appropriate STEERING COLUMN SWITCHES article in the ACCESSORIES/SAFETY EQUIPMENT Section.
scientia non olet · About LEMON Manuals