October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Window Relay Test
- Remove power window relay from fuse/relay block, located in engine compartment. See Fig 1
. Check continuity between power window relay terminals No. 2 and No. 4. Continuity should be present.
- Connect positive lead of a 12-volt battery to power window relay terminal No. 2, and negative lead of test battery to terminal No. 4. See Fig 2
. Continuity should be present between terminals No. 1 and No. 3 with voltage applied. Replace power window relay if continuity is not as specified.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.