October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil Resistance
- Disconnect ignition coil connector. Using a Digital Volt-Ohmmeter (DVOM), measure primary coil resistance between ignition coil connector terminals No. 2 and 3 (coils for cylinders No. 1 and 4) and terminals No. 1 and 3 (coils for cylinders No. 2 and 3). See Fig 1
.
- Remove ignition wires from coil. Measure secondary coil resistance between coil towers for cylinders No. 1 and 4 and between coil towers for cylinders No. 2 and 3. Primary and secondary coil resistance should be within specification. See IGNITION COIL RESISTANCE
table. Connect coil harness connector. Connect ignition wires to coil.
IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)
| Application |
Primary |
Secondary |
| Eclipse |
.70-.86 |
11,300-15,300 |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA