LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1993 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Basic Brake System - Lancer Evolution) >> Front Disc Brake Assembly >> Removal And Installation >> Installation Service Point >> >> A << Brake Hose Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Brake Hose Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pass the brake hose through the hole in the body-side bracket.
  2. Install the brake hose to the brake caliper.
  3. Install the brake hose at the two fixing points.
  4. Twist the brake hose toward the lesser torsion between the brake hose and body-side bracket as shown in the figure, and fix it to the body-side bracket with a clip.
    Fig 1: Passing Brake Hose Through Hole In Body-Side Bracket
    G05376298Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals