LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1993 >> Eclipse Base, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 11 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Fuel Pump >> Removal & Installation (Eclipse AWD)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Eclipse AWD)

WARNING: This page is about a different car, the 1994 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fuel pump assembly is located inside fuel tank. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove access panel under seat, in trunk or in rear cargo area. Disconnect electrical connectors and fuel hoses at fuel tank.
  2. Remove fuel filler hose from fuel tank. Remove fuel pump assembly. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals