LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1993 >> Eclipse Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Code 21 (AWD Models) >> "G" Force Sensor Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

"G" Force Sensor Circuit

  1. Test "G" force sensor. See "G" FORCE SENSOR under COMPONENT TESTING. If sensor is okay, go to next step. If sensor is faulty, replace sensor. See "G" FORCE SENSOR (AWD) under REMOVAL & INSTALLATION.
  2. Disconnect ECU wiring harness connector. Turn ignition on. Using a DVOM, measure voltage between terminal No. 6 and ground. See Figure . If battery voltage is not present, repair or replace wiring harness between "G" force sensor and ECU. If battery voltage is present, "G" force sensor circuit is okay. Replace faulty ECU.
scientia non olet · About LEMON Manuals