LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1993 >> Eclipse Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Turbochargers >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System: Turbochargers: Installation

WARNING: This page is about a different car, the 1994 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Before oil pipe flare nut (above turbocharger) is installed, pour clean engine oil into oil pipe installation hole of turbocharger. Ensure oil and air hoses are properly installed and securely clamped.
  2. Use new gaskets. Adjust accelerator cable (if necessary). Refill engine oil and coolant. Check for oil and coolant leaks. Tighten all bolts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals