Power Circuits
WARNING: This page is about a different car, the 1994 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition on. Check for battery voltage on ECM power terminals. See POWER TERMINAL IDENTIFICATION table. If battery voltage is not present, check operation of MFI relay. See RELAYS under MOTORS, RELAYS & SOLENOIDS.
GROUND TERMINAL IDENTIFICATION
| Application | ECM Terminals No. |
|---|---|
| Eclipse | 101 & 106 |
POWER TERMINAL IDENTIFICATION
| Application | ECM Terminals No. |
|---|---|
| Eclipse | 102 & 107 |
ENGINE CONTROL MODULE (ECM) LOCATION
| Application | Location |
|---|---|
| Eclipse | Behind Center Console |