September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Motor Relay
- Remove motor relay. Using ohmmeter, measure resistance between relay terminals No. 85 and 86. See Fig 1
. Resistance should be 30-60 ohms. Check for continuity between relay terminals No. 30 and 87. Continuity should not exist.
- Apply battery voltage to relay terminal No. 85, and vehicle ground terminal No. 86. Check for continuity between terminals No. 30 and 87. Continuity should exist. If relay does not test as specified, replace relay.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.