October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Clutch Assembly: Installation
- Using clutch pilot, install pressure plate and clutch disc. Tighten bolts evenly in a crisscross pattern to specification. See TORQUE SPECIFICATIONS
at the end of this article.
- Clean release bearing sliding surface. Apply multipurpose grease to release bearing sliding surface. Apply a light amount of grease to input shaft splines. DO NOT allow grease or dirt on clutch disc or pressure plate surfaces.
- To install remaining components, reverse removal procedure. Refill all fluids to proper level. Adjust all control cables, clutch pedal height and free play. See CLUTCH PEDAL HEIGHT & FREE PLAY
under ADJUSTMENTS.