LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Eclipse Base, Automatic >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 9 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Fuel Pump >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1994 Mitsubishi Diamante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fuel pump assembly is located inside fuel tank. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Raise vehicle on hoist. Drain fuel into suitable container. Disconnect electrical connectors and breather/fuel hoses at fuel tank.
  2. Remove fuel filler hose from fuel tank. Support fuel tank with transmission jack. Remove nuts securing fuel tank. Remove fuel tank from vehicle. Remove fuel pump assembly. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals