LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - System/Component Tests) >> Idle Control System >> Electrical Load Switch >> Diamante DOHC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diamante DOHC

WARNING: This page is about a different car, the 1994 Mitsubishi Diamante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ECM connector. See ENGINE CONTROL MODULE (ECM) LOCATION  table under COMPUTERIZED ENGINE CONTROLS. Using DVOM, measure input voltage between terminal No. 24 and vehicle ground. Turn headlights on. Measure voltage. Turn headlights off.
  2. Turn defogger on. Measure voltage. Turn defogger off. Depress brake pedal. Measure voltage. Release brake pedal. If any measurement is less than battery voltage, check and repair malfunctioning circuit. See appropriate wiring diagram under WIRING DIAGRAMS article in this section.
scientia non olet · About LEMON Manuals