LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1994 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Fuel Rails & Injectors >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Rails & Injectors: Removal

WARNING: This page is about a different car, the 1994 Mitsubishi Diamante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect negative battery cable. Drain coolant. Remove air intake hose. Remove throttle body and gasket with control cables and vacuum hoses attached.
  2. Remove EGR pipe (if equipped). Disconnect power brake hose. Label and disconnect vacuum hoses and wiring harness connectors as necessary. Remove intake plenum brackets and mounting bolts. Remove intake plenum and gasket.
  3. Disconnect high pressure fuel hose at fuel rail. Disconnect fuel return hose. Disconnect vacuum hoses. Disconnect injector electrical connectors. Remove fuel rail bolts, and lift fuel rail and injectors from engine. Injectors may be removed after fuel rail is removed from intake manifold.
scientia non olet · About LEMON Manuals